Acuvance Xarvis XX

XARVIS XX 

For all users aiming for the top

The highest model performing high potential in every category.

 

Equipped with the industry's highest performance FET device

(Our research as of December 2019)

E.S.C. is equipped with the highest level element in the FET element that determines the essential performance of E.S.C. Thereby, the control circuit has been brushed up.

 The basic performance has been greatly improved, and the torque feeling and high efficiency required by the driver has been obtained.

 Equipped with "Battery reverse connection protection circuit" and "Alert LED" for reverse connection.

https://www.youtube.com/watch?v=LQT3stYSEio 

 

"XARVIS XX" combines the best output in the RC industry with protection of substrate damage by reverse connection by optimizing the FET circuit.

(Our research as of December 2019)

In addition, it is equipped with an "Alert LED" that informs you of the reverse connection.

This function prevents E.S.C. board damage due to reverse connection for about 10 seconds.

* This protection function is only effective for ESC circuit board.

This function do not guarantee the protection of Chevalier series, capacitors or external devices.

 

Equipped with BEC voltage switching (6.0 / 7.4V) function

The output current has been increased in addition to the BEC voltage switching function.

 It powerfully drives a 7.4V input compatible high torque servo.

 

 

Equipped with two dedicated ACUVANCE cooling fan terminals.

(Including fan for FLEDGE)

Two FAN dedicated terminals are installed to enable simultaneous connection of REY-Storm and FLEDGE.

＊[REY-Storm / XARVIS exclusive high-speed rotation FAN unit ] 

＊[FLEDGE / Forced air-cooled brushless motor]

（When using ACUVANCE FAN, the original performance may not be exhibited by power supply from the BEC terminal of the receiver.）

 

Rebuilt our original 3D bridge structure design.

(FAN floating installation)

It is a structure that the FAN is installed floating above the E.S.C.

XARVIS adopted this 3D design that realized efficient cooling for the first time in the world.

The X-shaped design on the top of the ESC created an efficient airflow.

Higher cooling performance has been obtained.

 

 

New capacitor mounting terminal

A small terminal for capacitors is installed in addition to the battery connection terminal. This makes the soldering work easier.

 

XARVIS XX original setting data will be added at any time by installing a new program control circuit　【※１】

Based on XARVIS, a new unique program control circuit to XARVIS XX is installed.

 In addition to the newly installed setting items "torque level/torque end point" and "BEC voltage switching", setting items dedicated to XARVIS XX will be added at any time.

 [Torque level]: Adjusting the feeling of acceleration/deceleration torque.

[Torque end point]: The neutral position is the starting point of the effect, and it is an item that determines up to which throttle position the torque level is effective.

 

Refer to the instruction manual for details.