SS Bottom Feeders - Super 1.8 Weight Hangers for Axial® SCX24tm
$79.99
Buy and save
Buy and earn $1.59 Loyalty for your next purchase
Loyalty is a discount program that lets you buy products and earn points to redeem on your next purchase. Your Loyalty balance is updated when you pay online or in-store. The Loyalty amount shown on this page can be recalculated at the checkout.
In stock: 1 available
Save this product for later
SS Bottom Feeders - Super 1.8 Weight Hangers for Axial® SCX24tm
Product Details
The Bottom Feeders super weight hangers are a class 3 must and provide incredible weighting and tuning control corner to corner. They are intended to be used with our RidgeBeast 1.8" wheels.
- Adjustable canting forward or back
- Removable weight slugs. Each hanger also has 6 slots so you can mix and match weights to get your optimal weight balance and positioning.
- Bearing supported two-piece nylon construction locks into the axle's knuckle
Axle Compatibility: The initial version is designed to fit our X15 axles front or rear. MEUS ISO version to come in the near future.
Wheel Compatibility: They are designed to only work with super 1.8" wheels such as our RidgeBeast wheels. The hangers rely upon either our +6 or +7.5 MF6 Hubs to properly support the hangers via the bearing. We welcome wheel designers to design around our adjustable hubs to provide further options. Please reach out via email if you're interested.
Weights:
- Bare Hanger w/ Bearings and Nylon Hub: 11.5g
- Aluminum: 0.5g Each (6- 3.1g)
- Brass: 1.9 g each (6- 11.2g)
- Stainless Steel: 1.8g Each (6- 10.5g)
- Tungsten: 3.1g Each (6- 18.7g)
Use our calculator below to help guide you to the best setup for your needs.
Includes:
- 2x Nylon Hangers
- 2x Nylon Axle Attachment
- 4x +7.5 Nylon MF6 Hubs
- 2x include lip for rear axle applications
- 12x 8mm x 6mm Keel Weights in material of choice
- 4x 21mm x 15mm x 4mm Bearings
- Hardware
Important Install Info
- Included Nylon +7.5mm MF6 Hubs (No lip) Steering axle only
- Included Nylon +7.5mm MF6 Hubs (With Lip) Rear straight axle only
- When using with our metal MF6 hubs on the rear, you will used the included M2 countersunk screws to prevent the hangers from sliding too far inward over the axle.
Bottom Feeders Weight Calculator
Dial in your SCX24's weight before you buy. See exactly how many grams a Bottom Feeders setup adds, or enter your corner weights and let the calculator tell you how many slugs to run in each corner to hit your target front bias.
Fits Mofo RC X15 axles 6 slugs per hanger Sold in pairs Nylon +7.5 hubs included MEUS ISO compatibility coming soon
Select a calculator above to get started.
Configure your hanger pairs
▲ Front of vehicle
Front pair (mirrored left & right)
Slugs: 6 of 6 holes filled per hanger
Aluminum 0.6g
0
Stainless Steel 1.7g
6
Brass 2g
0
Tungsten 3.1g
0
Hubs (both sides)
+46.0g this axle (+23.0g per corner)
Added weight bias50.0% front / 50.0% rear
Rear pair (mirrored left & right)
Slugs: 6 of 6 holes filled per hanger
Aluminum 0.6g
0
Stainless Steel 1.7g
6
Brass 2g
0
Tungsten 3.1g
0
Hubs (both sides)
+46.0g this axle (+23.0g per corner)
Rear of vehicle ▼
Total weight added
Setup summary
92.0g added| Item | Weight |
|---|---|
| Hangers × 4 (11.5g each) | 46.0g |
| Nylon +7.5 (included) hubs × 4 | 4.0g |
| Stainless Steel slugs × 24 | 42.0g |
| Front axle / rear axle | 46.0g / 46.0g |
| Front/rear bias of added weight | 50.0% front / 50.0% rear |
| Total added to your rig | 92.0g |
What to buy
2 × Bottom Feeders pair loaded with Stainless Steel$79.98
Total$79.98
Other options: tap to switch
Cheapest combination for this setup.
Not every hole needs a slug, and you can mix materials freely within one hanger. Bottom Feeders are sold in pairs, bare or loaded with a full 12-pack of one material, and always include nylon +7.5 hubs. Extra slugs come in packs of 12 (stainless & tungsten also in packs of 4). Hub weights shown are the full weight of the hub fitted. Slugs in the hangers ride lower than hub weight, so fill hanger holes first. Step up to aluminum or brass hubs only if your hangers are full and you still need more grams.
Enter your corner weights (grams)
▲ Front of vehicle
Front Left
Front Right
Rear Left
Rear Right
Rear of vehicle ▼
Hanger hardware will be added to each corner before balancing: 11.5g hanger + your hub choice below, per corner.
Set your target front bias
60% front / 40% rear
Your recommended setup
Recommended setup
-Enter all four corner weights above to see your setup
Powered by Lightspeed
Display prices in:USD
